NM 50 floor coating

Two-component, epoxy-based, solvent-free floor coating with a thickness of 0.3–0.6 mm. NM 50 is intended for floors that are subject to penetration of water. NM 50 is a water-based epoxy emulsion with excellent bonding properties even on wet concrete, and high resistance to chemical effects. 

Intended for:

• Areas that are subject to relatively low wear (floors of warehouses, balconies, roof terraces, and auto repair shops).
• Thanks to its excellent diffusion properties and resistance to water, NM 50 is particularly suitable for use in damp conditions.

Packaging

• 4.0 kg of base substance + 5.0 kg of hardener

Technical details

• Product marking: NM 50
• Hardener: NM H 50
• Mixing ratio: 100/125 parts by weight
• Pot life, 100 g at 20 °C: 45 min
• Density: 1,140 kg/m³
• Viscosity: 2 Pa*s
• Solids: 57%
• Compressive strength: 70 MPa
• Tensile strength: 28 MPa
• Bend/pull: 38 MPa
• Evaporation of water (200 μ layer): 14 g/m²/h
• Lowest hardening temperature: +10 °C
• Colour: according to colour chart
• Consumption: approx. 2 x 0.25 kg/m²
• Storage: 12 months in unopened container in a dry and shaded place between +5 and +25 °C